What should I do if my Buggy Lithium Battery has been immersed in water?
Under no circumstances should a Li Battery that has been immersed in water be connected to a buggy or charger. By doing so you may create a fire hazard or risk the battery catching fire.  Please contact the MGI Service Centre to arrange a replacement.
My X1 turns off during the round

A quick tap on the start/stop button is all that is needed to operate your X1 buggy. Do not hold the start/stop button down as you may trigger the buggies “sleep mode” function. Your X1 is fitted with a sleep mode function that is activated when the start/stop button is held for 3+ seconds or if your buggy has been dormant for 30 minutes.

If you find that your top box has turned off, simply hold down the start stop button for 3 seconds until the top box illuminates.

My golf bag does not fit onto my buggy
Ensure the handle is locked into the highest position and the top bag support has been lowered into position.
My battery is connected to my buggy but there is no display on the LCD screen
Please ensure your battery is fully charged. If so, the buggy may need to be taken to an authorised MGI repair centre for inspection.
When operating the speed control, the speed setting does not change
Ensure your wheels are on the correct side and they are locked into the drive position.(X1 and X3 only),  If this is correct, you may need a replacement speed control.
When operating the buggy, the top box illuminates, the speed settings change but the buggy does not go
Ensure your wheels are on the correct side and they are locked into the drive position.(X1 and X3 only),  If this is correct, the buggy may need to be taken to an authorised MGI repair centre for inspection.
My buggy is running slow
Check your wheels to ensure the Left wheel is on the left side and the right is on the right.(X1 and X3 only),  If your buggy is running consistently slow you will need to take it to an authorised MGI repair centre for inspection. If your buggy seems to get slower as the game progresses, your battery and charger need to be inspected by an authorised MGI repair centre.
The distance measure is not working
The buggy will need to be taken to an authorised MGI repair centre for inspection.
My buggy does not turn on properly
Ensure your wheels are on the correct side and they are locked into the drive position. If this is correct, one of you clutches may be seized (X1 and X3 only), your rear wheels should roll forward freely and lock when pulling back. If one of your wheels does not roll forward freely you may need to replace the wheel
My buggy is noisey
Lightly lubricate the axles using petroleum jelly, If the problem persists, The buggy may need to be taken to an authorised MGI repair centre for inspection
My buggy pulls to one side
Ensure your wheels are on the correct side and they are locked into the drive position. The side of the buggy is determined looking from the rear of the buggy. If this is correct, your front wheel may need adjusting. Please refer to manual for adjustment instructions. (X1,X3 and X5 models only)

If your buggy is a Zip Navigator, please refer to the attached PDF for motor trimming instructions.

Please refer to the attached PDF for more information