Under no circumstances should a Li Battery that has been immersed in water be connected to a buggy or charger. By doing so you may create a fire hazard or risk the battery catching fire. Please contact the MGI Service Centre to arrange a replacement.
Check the fuse located on the leads, check the connections to the terminals and the lead connections. If everything is okay, please take your battery to an authorised MGI repair centre
Ensure your leads are connected correctly and the power is switched on. Your charger may be faulty. Please take your battery and charger to an authorised MGI repair centre
Your charger may be faulty. Please take your battery and charger to an authorised MGI repair centre
Your battery will need to be tested. Please take your battery and charger to an authorised MGI repair centre
The Green LED illuminates to indicate the charger is powered on. The Red LED indicates the battery is charging. The LED will turn Green when the battery is fully charged and on float charge.
Please use our ‘battery wizard’ to assist choosing a battery for your unit.
Charge your new battery for at least 8 hours or overnight before use.
If you will not be using the battery for more than a month, fully charge the unit, remove from charging & store in a warm, dry location. Attempt to use the battery every 1 – 3 months either by lending to a friend or family member for a round or removing the wheels & running the unit in a stationary position for half an hour. Place it back on charge till fully charged & store again.
Unfortunately with the larger capacity battery the battery indication on your top box is now not visible when fully charged. However, after a number of holes the battery indication will appear. It will show a maximum battery capacity reading. It will then operate as normal.
